Battery and cord

Cordless impact wrench kit, 590 ft-lb

Rips stubborn lug nuts off the stud and eases off the throttle before the hardware rolls away into the driveway gravel.

$85.99★ 4.65 rated it

The figure is what the listing showed when we last checked it. The retail partner keeps the current one. The listing itself, with checkout and delivery, lives with our retail partner.

Drive	1/2 in.
Torque	590 ft-lb (800 N.m), 3500 IPM
Speeds	Three, with auto-stop brake in reverse
Batteries	Two 21V 4.0Ah packs with fast charger
Light	Built-in LED over the anvil
In the box	Wrench, two batteries, charger, 5 sockets, 4 nut drivers, 6 drill bits, 6 driver bits, flex shaft
Not in the box	A torque stick if you finish wheels to spec

From our bench

A breaker bar gets old after the third wheel. We built this impact wrench to spin off rusted mower blades and stubborn lug nuts without wrestling a pipe over a socket handle. Two batteries keep one on the charger while you work around the vehicle.

Reverse mode control

Backing off a tight nut can send hardware skittering across the concrete. We shaped the reverse setting to back off its hammering the moment the threads break loose, keeping the fastener right on the anvil.

Power at the anvil

Three forward speeds let you run down smaller bolts without hammering them into scrap. The brushless motor handles wheel lugs, rusty mower decks, and scaffold joints where hand ratchets leave you stuck.

Kit in the case

We pack deep impact sockets, magnetic nut drivers, drill bits, and a flex shaft into the carry case. The charger and two batteries sit beside the tool so you are ready to work right away.

Finishing on your shelf

Impacts break things loose and run them down fast. But final seating on your wheel lugs belongs to your own hand torque wrench, which is not in this case and stays on your pegboard.