SEESE
Magnetic screw ring for hex bits, 2 pack
$12.69★ 3.61693 rated it
built for the workbench
SEESE tools for the driveway and the weekend list
We build hand and battery tools for the home garage. Every box list tells you what sits inside and what still has to come from your own shelf.
specs beside the tool
Figures sit in a table beside each tool, not inside adjectives.
honest box lists
We write what is missing as plainly as what is in the tray.
one battery family
The same pack moves between the blower, the trimmer, and the wrench.
sorted by job
Our catalog divides tools by where they live in the work.
find the tool by the job
Pick the job that is waiting on your bench or along your driveway.
Leaves along the fence lineA truck to wash and loadScrews going in overheadA wire to strip cleanlyA load to strap downSomething else entirely
four shelves on the wall
The catalog is divided by where a piece sits during the work. Motors, hand pieces, magnetic bench gear, and yard tools each keep their own shelf.
most written about
These are the pieces people have had the most to say about after putting them to work along the bench and the driveway.
The figure is what the listing showed when we last checked it. The listing itself keeps the current one.
Rope tightening tool with cam buckle, green
$11.99★ 4.4192 rated it
8-in-1 wire stripper with voltage tester
$15.99★ 4.298 rated it
Magnetic tool holder belt clip
$15.99★ 4.682 rated it
Cyber cordless leaf blower, 52000 RPM
$98.91★ 4.147 rated it
Magnetic tool mat S, 117 x 117 mm
$9.99★ 4.545 rated it
Countersink drill bit set, 15 pieces
$23.99★ 4.429 rated it
Cordless impact wrench kit, 590 ft-lb
$85.99★ 4.328 rated it
Car wash foam gun for garden hose
$29.99★ 4.228 rated it
the powered line
Our cordless tools share one battery family and wind motors for one hand. The spec table beside each motor states what it moves, turns, or cuts.
Battery and cordthe job picker
Name the task waiting on your weekend list and we point at the piece built to handle it.
point me at itnew on the bench
A look at the latest pieces we sorted into the catalog.
the catalog counted plainly
Tools, shelves, and shared batteries laid out without filler words.
25tools on the wall
4shelves in the catalog
7tools on one battery family
5.0highest rating on the shelf
how we build
the spec promise
Figures belong in a table beside the piece, not in marketing copy. You see the motor ratings before you pick up the box.
clear box lists
If a tool needs a tank, a drill, or a hose from your shelf, the packing list says so right away.
earned bench space
A tool enters our line only when we can name the garage task that called for it. We do not make pieces to fill empty shelf space.
three steps to the right tool
How to choose what belongs on your workbench without buying the wrong piece.
- start from the jobLook at the task waiting in the garage or driveway. The work decides the tool, not the other way around.
- read the spec tableCheck the figures beside the piece. They state what the motor turns or what the blade cuts.
- check the box listSee what comes in the box and what must come from your own shelf before you begin.
what comes from your shelf
Some of our boxes arrive complete and ready to work. Others expect a tank, a drill, a hose, or a second pack from your own bench, and this table names which.
| The tool | What comes from your shelf |
|---|---|
| Turbo cordless leaf blower, 150 MPH | A second battery for yards that take longer than one charge |
| Propane torch gun with trigger lock | The propane tank |
| HVLP electric paint sprayer | Thinner for thick paints; the viscosity cup tells you when |
| Cordless impact wrench kit, 590 ft-lb | A torque stick if you finish wheels to spec |
| Countersink drill bit set, 15 pieces | A drill; the set feeds one, it does not replace one |
| Home tool set, 126 pieces with drill | A second battery platform; this drill keeps its own 8V pack |
On the magnet
the magnetic screw ring
This small ring slides over a standard hex bit to magnetize the tip. Screws stay seated while driving overhead or deep inside a dark cabinet. We put two rings in each pack so a drill and a hand driver can each keep one on the collar. The ring slips on and off with bare fingers and remains one of our most discussed bench pieces.
$12.69★ 3.61693 rated it
keeping tools running
worth doing
- Bring battery packs indoors when winter cold sets in.
- Wipe sap off the hedge trimmer blades at the end of a row.
- Wipe metal chips off the magnetic mats with a rag.
- Rinse the foam gun bottle with water after washing a car.
not worth doing
- Leaving the torch head screwed onto the tank between cookouts.
- Running a blower wide open down a whole driveway when a dial setting clears it.
- Pulling a jacket through a stripping notch one size too small.
- Coiling tie-down rope into a bin while soaking wet.
the way we work
We make motors and hand tools we want on our own benches. Spec sheets state real figures instead of burying them in broad praise. Packing lists name what is missing from the carton, and we say where a tool stops being enough so you do not take the wrong piece to the job.
notes from the shop
We wrote down the answers we keep giving across the workbench on blowers, wiring, stuck bolts, and tensioners.
Starting out
A first cordless kit for the garage, in the right order
One battery family runs our blower, trimmer and wrench. Here is the order we would buy in, and why the charger matters more than the third tool.
Read the noteReading the figuresMPH, CFM and what a blower actually moves
Speed figures get the headlines, volume figures move the pile. What each number does, and which jobs lean on which.
Read the noteWiring benchStrip a wire without nicking the copper
A nicked conductor breaks later, inside a wall, where finding it costs an afternoon. The habits that keep the copper whole.
Read the noteSmall steelWhy screws go missing, and how magnets stop it
A dropped screw costs a minute. A lost one stalls a reassembly. The magnetic habits that keep small steel where it landed.
Read the noteOpen flameWhere a propane torch earns its keep
One torch head, one hardware store tank, and a surprising list of jobs: charcoal, a sear, a fireplace, a stubborn campfire.
Read the noteRope workHold the load with a cam buckle, not a knot
Most tie-down trouble is a knot that slipped or one that will not open. A cam buckle replaces both problems with a lever.
Read the notechoosing the right gear for the home garage
Choosing gear for a home garage starts with the work waiting on your list. A leaf pile calls for a one-hand blower, while a stuck lug nut needs an impact wrench. Starting from the task keeps you from buying tools that sit idle on a pegboard.
Some people are outfitting a bench for the first time, while others need to replace an old hand tool that gave out. A new bench benefits from basic drivers and pliers, while an established garage often adds magnetic mats or a propane torch head.
| Shelf | Tools | Reach for it when |
|---|---|---|
| Battery and cord | 8 | A pile to move, a limb to cut, a bolt that will not turn by hand |
| In the hand | 5 | Wire to strip, a screw to seat, a stuck edge to grip |
| On the magnet | 6 | Fasteners that wander off the bench or into the grass |
| Yard and drive | 6 | A load to strap, a line to tension, a yard to keep |
where to start
Start with the specific job waiting this weekend. Look at the chore, read the spec table, and check what must come from your own shelf before you start.
If the main hand tools already sit in your toolbox, look at the pieces that solve daily annoyances. Magnetic rings hold small screws in place, and cam buckle straps keep driveway loads secure.
ready for the weekend work
Browse the shelves along the wall or let the job picker point you toward the right piece for your bench.
Battery and cordIn the handOn the magnetYard and driveName the job