In the hand

8-in-1 wire stripper with voltage tester

A pair of long nose stripping pliers with a built-in detector that checks lines with light and tone before you pull a lead.

$15.99★ 4.298 rated it

In stock

The figure is what the listing showed when we last checked it. The listing itself keeps the current one.

Does	Strips, cuts, crimps, twists, tests voltage
Tester	Built-in, with light and sound alarms
Form	Needle nose pliers
In the box	One pair of pliers
Not in the box	Nothing else is needed

From our bench

Reaching into a crowded outlet box usually means juggling three separate hand tools while guessing which wire is live. We built the tester directly into the frame of these needle nose pliers. You get a clear tone and light, then use the same jaws to grab, strip, and twist.

Long nose reach

The slender nose slips past crowded bundles in deep electrical boxes. You can grab a short wire, pull it forward into the light, and loop the end around a terminal screw without reaching for a second pair.

Tester in the frame

Before your fingers touch a wire, hold the tip close to the sheath. The body sounds an audible tone and lights up when current is present. It lets you confirm the breaker did its job.

Edge and notch stations

The throat carries sharp cutters for copper cable, clean stripping notches for common house gauges, and a crimping pocket near the pivot. One squeeze strips the insulation cleanly without nicking the metal underneath.

What arrives

You get the single multi-use pair of pliers in the box, ready to go into your back pocket or tool pouch. No extra attachments or loose parts to track down on the workbench.