In the hand

5-in-1 wire stripper with swap heads

One handle, five heads: diagonal cutter, stripper, long nose, wire cutter, and metal snips, with a tester tucked in for live leads.

$39.66★ 4.313 rated it

In stock

The figure is what the listing showed when we last checked it. The listing itself keeps the current one.

Heads	Five: diagonal cutter, stripper, long nose, steel-wire cutter, sheet-metal snips
Wires	Stripping holes for 10 to 22 AWG
Steel	Chrome-vanadium heads
Tester	Non-contact, beeps and flashes from 5V to 220V AC
Handles	TPR over PP, spring-assisted so they reopen on their own
In the box	Handle, five heads, compartment case
Not in the box	Nothing else is needed

From our bench

A wiring job pulls four tools out of the drawer and you still walk back for the snips. This handle takes five heads that twist on and off, keeps them in a flat case, and the tester in the grip answers whether a lead is live.

Five heads, one grip

The diagonal cutter, the stripper jaw, long nose pliers, a hardened wire cutter, and sheet metal snips all seat in the same handle. Chrome vanadium heads hold an edge through trailer looms and lamp cord.

Stripping to gauge

Shaped holes along the jaw match the common household and automotive wire, so insulation parts cleanly and the copper under it keeps every strand. The notches sit where your thumb expects after a lead or two.

Checking a lead

The tester beeps and flashes near live wire from a doorbell transformer up to a wall circuit, with no need to touch bare metal. It settles the question before the cutter goes anywhere near the insulation.

Handles and case

Rubber over the grips cushions a long squeeze and a spring pushes the jaws open again on their own. All five heads and the handle drop into a compartment case that closes flat in the bottom of a tool bag.